Preview#34
Default settings, as the app shows a style you don't own yet.
Tech & games
Circuit Trace
- Trail
- Hint skin
- Message skin
- Sounds
- Start
- A plated solder pad lights up and a via ring grows out of it.
- Draw
- The path is routed as copper traces at 0, 45 and 90 degrees over a solder-mask band, corners chamfered, vias at the bends, small surface-mount parts beside the copper and current pulses racing along it toward an airwire at the cursor.
- Release
- A QFP chip drops onto the end of the trace, a wave of current powers the whole board and lights its LEDs, a wisp of rosin smoke rises, and the board fades.
$1one-time, tax included
On sale when Input.Observer is released.
What you can tune
Every setting below is yours to adjust in Input.Observer's Appearance page once you own the style. Here they are listed at their defaults.
Trail21
| Setting | Range | Default |
|---|---|---|
| Trace width (px) | 1 to 10 | 3.2 |
| Copper color | Any color | #E2A84C |
| Solder mask color | Any color | #1F8C4C |
| Solder mask opacity | 0 to 1 | 0.5 |
| Trace length before it fades (px) | 200 to 4,000 | 1,100 |
| How far the path may stray before the trace turns (px) | 3 to 40 | 12 |
| Shortest straight run (px) | 4 to 80 | 14 |
| 45° corner cut (px) | 0 to 24 | 6 |
| Vias at the bends | On or off | On |
| A via every how many bends | 1 to 8 | 3 |
| Via size (×) | 0.5 to 2.5 | 1 |
| Parts beside the trace | On or off | On |
| Distance between parts (px) | 20 to 400 | 75 |
| Part size (×) | 0.5 to 2.5 | 1.25 |
| LED color | Any color | #3DFF7A |
| Current pulses along the copper | On or off | On |
| Pulses per second | 0 to 20 | 3 |
| Pulse speed (px/s) | 60 to 1,500 | 380 |
| Current color | Any color | #FFE9A0 |
| Chip size (×) | 0.5 to 2.5 | 1 |
| Rosin smoke wisps on release | 0 to 20 | 4 |
Particles and timing9
| Setting | Range | Default |
|---|---|---|
| Amount along the path (×) | 0 to 4 | 1 |
| How long particles last (×) | 0.1 to 4 | 1 |
| Particle size (×) | 0.25 to 3 | 1 |
| Particle speed (×) | 0 to 3 | 1 |
| Trail line length (×) | 0.1 to 4 | 1 |
| Fade-out speed after release (×) | 1 to 8 | 3.3 |
| Draw the trail line | On or off | On |
| Show the characters and the glow at the cursor | On or off | On |
| Burst when the gesture ends | On or off | On |
Hint panel9
| Setting | Range | Default |
|---|---|---|
| Themed hint panel | On or off | On |
| Hint background | Any color | #0D3A21 |
| Hint border | Any color | #D9A441 |
| Hint action text | Any color | #F4FFF6 |
| Hint group text | Any color | #F0C463 |
| Hint note text | Any color | #A7D8B5 |
| Copper traces round the edge | On or off | On |
| Vias on the corners | On or off | On |
| Gold edge-connector fingers below | On or off | On |
Display messages4
| Setting | Range | Default |
|---|---|---|
| Themed display messages | On or off | On |
| Chip pins along the top and bottom | On or off | On |
| Pin spacing (px) | 5 to 20 | 9 |
| Pin-1 dot in the corner | On or off | On |
Sound3
| Setting | Range | Default |
|---|---|---|
| Gesture start sound volume | 0 to 1 | 0.65 |
| Drawing loop volume | 0 to 1 | 0.5 |
| Release sound volume | 0 to 1 | 0.75 |