Workbench

Start: A tape measure's case sits at the press point and a claw hammer appears at the cursor, its yellow tape hooked on and starting to run out.
Draw: The tape runs out along the path with ticks printed along its edge while the hammer taps a nail in every so often with a spark and a puff of sawdust, screws spin themselves in beside the tape and wood shavings curl down.
Release: The hammer drives one last nail, the tape snaps back into its case with a zip, its ticks streaming after the hook, and a wrench, screws and nails clatter down and bounce to rest.

$1one-time, tax included

On sale when Input.Observer is released.

What you can tune

Every setting below is yours to adjust in Input.Observer's Appearance page once you own the style. Here they are listed at their defaults.

Trail30

Setting	Range	Default
Tape color	Any color	#F4C430
Tape width (px)	4 to 30	11
Length of tape shown (px)	100 to 2,400	760
Tick marks on the tape	On or off	On
Gap between ticks (px)	2 to 16	4
Tick color	Any color	#1E1A10
Tape case at the start	On or off	On
Case size (×)	0.5 to 2.5	1
Hammer at the cursor	On or off	On
Hammer size (×)	0.4 to 2.2	0.9
How high the hammer lifts between blows (rad)	0 to 1.6	0.8
Nails hammered in	On or off	On
Path between nails (px)	16 to 400	70
Screws spinning in	On or off	On
Path between screws (px)	30 to 800	150
Time a screw takes to spin in (s)	0.1 to 2	0.5
Screw metal	Steel · Brass · Black oxide	Steel
Nail and screw size (×)	0.5 to 2.5	1
Sparks at each blow	On or off	On
Sparks per blow	0 to 15	3
Sawdust	On or off	On
Path between sawdust specks (px)	6 to 200	22
Wood shavings curling down	On or off	On
Path between shavings (px)	15 to 600	85
Shaving size (×)	0.5 to 2.5	1
Time the tape takes to snap back (s)	0.15 to 1.5	0.4
Sparks at the last blow	0 to 30	8
Tools and screws clattering down on release	0 to 20	6
A wrench among them	On or off	On
How far below the release point they land (px)	10 to 300	70

Particles and timing9

Setting	Range	Default
Amount along the path (×)	0 to 4	1
How long particles last (×)	0.1 to 4	1
Particle size (×)	0.25 to 3	1
Particle speed (×)	0 to 3	1
Trail line length (×)	0.1 to 4	1
Fade-out speed after release (×)	1 to 8	2.44
Draw the trail line	On or off	On
Show the characters and the glow at the cursor	On or off	On
Burst when the gesture ends	On or off	On

Hint panel10

Display messages6

Sound3